6×7 Bathroom Layouts
A 6×7 bathroom is 42 sq ft (72″ × 84″). 3 of 4 standard layouts pass code clearances at this size. With a tub or a 30″-wide shower on the short wall, the widest vanity that keeps the toilet legal is 24″ (the plans default to 18″ for more elbow room). Putting the tub on the long wall does not work here — see Plan D for why and how to fix it.
Plan A · Classic full bath
Rough-in sheet for your plumber
Where drains and supply lines go for Plan A in a 7′-0″ × 6′-0″ room. Measured from the finished face of each wall.
| Rough-in | Position | Notes |
|---|---|---|
| Toilet flange (center) | 48″ from left wall · 12″ from back wall | Standard 12″ rough-in toilet |
| Sink drain | Back wall · 75″ from left wall | 18–20″ above floor (typical) |
| Tub drain | 15″ from left wall · at the back-wall end | Drain end on the plumbing wall |
| Tub/shower valve | Back wall, above the drain end | 28″ tub · 48″ shower head valve (typical) |
Heights are typical values — confirm them against the spec sheets of the fixtures you buy.
Other bathroom sizes
Only need a toilet and a sink? See half bath layouts.
Clearance rules used on this page
Based on International Residential Code minimums. Local codes can be stricter — confirm with your building department. How we check plans
Questions about 6×7 bathrooms
Is a 6×7 bathroom big enough for a walk-in shower?
Yes. A 30″ × 72″ walk-in shower fits on the 6′ wall in place of a tub (Plan B), and the toilet and a 18″ vanity still keep their clearances.
What's the largest vanity for a 6×7 bathroom?
24″ with a tub or 60″ shower on the short wall, and 18″ with a 36″ corner shower. At those widths the toilet sits at the 15″ code minimum on each side. Our plans show 18″ and 18″ by default, which leaves a more comfortable 18″ when the room allows it.
Can a 6×7 bathroom have a bathtub?
Yes. A standard tub fits across the 6′ wall with the toilet and vanity beside it on one plumbing wall (Plan A).
Which door works best in a 6×7 bathroom?
An in-swing door works in Plan A, Plan B, Plan C at this size. A pocket door frees the swing area and needs about 30″ of plain wall beside the opening; an out-swing door needs the same clearance in the hallway.