6 ft Reach-in Closet Layouts
A 6 ft reach-in closet is 72″ wide and 24″ deep (12 sq ft). 3 of 4 layouts pass the planning check; the one with the most hanging space (Plan B) gives about 12 ft of rod and 6 ft of shelving. Sliding doors reach half of the 72″ opening at a time; bifold and hinged doors reach nearly all of it.
Plan A · One long rod
No building code for closet layout
The building code does not set a size or layout for reach-in closets, so these checks are planning recommendations, not code: about 24″ deep (20″ at the least), a single rod run of at least 48″, double-hang sections around 36″ wide, and 24″ of floor clear in front of sliding doors (36″ for doors that swing). Where each number comes from.
Other reach-in closet widths
Closets are not covered by the building code — these checks are planning recommendations. Walking into your closet? See walk-in closet layouts.
Every 6 ft reach-in closet layout as a picture




Planning rules used on this page
The building code has no closet layout rules, so these are common planning recommendations. Sources · How we check plans
Questions about 6 ft reach-in closets
How much hanging space does a 6 ft reach-in closet have?
Plan B gives about 12 ft of rod counting each hanging level (a double-hang section has two rods, one at about 40″ and one at about 80″). A single rod across 72″ is 6 ft; double hang across the full width is 12 ft.
Which door is best for a 6 ft reach-in closet?
It depends on how much of the closet you need to reach at once. Sliding (bypass) doors expose about half (36″) of the 72″ opening at a time and need no swing space, but ask for 24″ of clear floor in front. Bifold doors expose nearly all of the 72″ opening and need floor clearance of roughly half a door's width. Hinged (French) doors expose the full 72″ opening, but each leaf needs floor space equal to its width, and 36″ is the usual allowance. Door facts are from Closet World's door guide (see the clearance rules page).
Is 24″ deep enough for a reach-in closet?
Yes: 24″ is the standard depth for hanging clothes on standard hangers, and closets as shallow as 20″ can be used. Bulky coats and formal dresses may want 28–30″. Enter your own depth in the planner above to see the checks change.
Can I fit drawers or shelves in a 6 ft reach-in closet?
Shelves, yes: Plan C adds a 24″ stack of shelves beside 48″ of double hang. A drawer unit as well (Plan D) needs 90″ of width, so Plan D is shown with the fix.